Rejillas tipo mallas de refuerzo en PRFV

Los elementos de construcción a menudo deben ser restaurados o incluso reemplazados debido a los daños ocasionados por la corrosión de las armaduras de acero, lo que lleva a la destrucción de la estructura de hormigón. Esto se produce regularmente cierto para los componentes expuestos a la sal que se utiliza para el deshielo en las carreteras. Con mallas de refuerzos en PRFV, la corrosión es un problema del pasado. Reduce drásticamente el número de reparaciones necesarias para los componentes de la construcción. Los refuerzos en PRFV se aplican principalmente a las piezas de construcción de hormigón estandar y con polímeros.

Aplicaciones

Revestimiento
Flexible, para una superficie curveada
Vaciar el hormigón

Dimensiones disponibles

Altura max.: 1,8 m
 

Diámetro
2 mm
2.5 mm
3 mm
4 mm
6 mm
8 mm

Tamaño de la malla

              
50 x 50 mm
  
           X
               X
           X
           X
          
 
50 x 100 mm
  
      X
         X
      X
      X
      X
  
100 x 100 mm
      
           X
           X
           X
  
100 x 150 mm
      
      X
      X
      X
      X
100 x 200 mm
        
           X
           X
           X
150 x 150 mm
        
      X
      X
      X
200 x 200 mm
        
      X
      X
      X

 

GRP Mesh Performance

E-Modulus GPa

Tensile strength MPa

  40

200

  
  rods/m minimum tensile strength of mesh - N/m
Rod diameter mm   2 2,5 3 4 6 8
Mesh mm              

50 x 50 mm

 20 12.560 19.625 28.260 50.240 113.040 200.960
50 x 100 mm 10 6.280 9.813 14.130 25.120 56.520 100.480
100 x 100 mm 10 6.280 9.813 14.130 25.120 56.520 100.480
100 x 150 mm 7 4.396 6.869 9.891 17.584 39.564 70.336
100 x 200 mm 5 3.140 4.906 7.065 12.560 28.260 50.240
150 x 150 mm 7 4.396 6.869 9.891 17.584 39.564 70.336
200 x 200 mm 5 3.140 4.906 7.065 12.560 28.260 50.240

Solutions for the construction industry

When steel reaches its limits, the more environmentally friendly glass fibre reinforcement is used. Due to its durability and high resistance to external influences, renovation work and cracks in concrete are significantly reduced.
Fibrolux offers a glass fibre based reinforcement system that fully meets the requirements of sustainability, durability, efficiency and cost saving.
As a structural engineering material, steel has been a success story since the industrial revolution. However, steel also has disadvantages, which are outweighed by the GRP reinforcement.

GRP reinforcement mats have some unbeatable advantages over steel, which have made them indispensable in a wide range of applications in construction projects for several years now.

  • Corrosion-free - Durability
  • Very high tensile strength with the same Ø compared to steel
  • enables a low concrete cover
  • chemical permanence
  • electrically/thermally non-conductive
  • easy machinability and processing
  • very low weight despite its many properties
  • easy practical handling with spacers and cable ties
  • high load-bearing capacity of the material
  • Economy/cost saving, smaller Ø required

Plastering walls becomes easier.

  • Adhesion to the substrate is better and
  • The application of material is reduced.
  • The formation of cracks is almost impossible.

The same advantages as for plastering walls also apply to plastering ceilings. Here the improved adhesion of the plaster is even more important.

The repair of components, even in difficult places, is particularly facilitated by the easy handling and processing of GRP mesh mats and is completed in a shorter time.